Select Page

Supported EtherCAT Slave Device

Alicat
MCP-50
Mass Flow Controller

Nov 5, 2020

Country of Origin

USA

Manufacturers

Alicat

Node Type

Flow Controller

EtherCAT

Servo Drive for demanding tasks with axis and NC synchronization.

 

Features

  • EtherCAT Max. 100Mbps transfer rate
  • 2-axis closed-loop stepper drive
  • K221 : Current 1.8A / axis
  • Bi-polar current driving system
  • Resolution : 500~50,000 pulse / revolution
  • Encoder feedback
  • DIP switch for address setting
  • Dimensions : L-75 x W-140 x H-47 mm

 

Specifications

Serial Interface Fast Ethernet, Full-Duplex
Distributed clock 0.5 / 1 / 2 / 4 ms
Cable type CAT5 UTP / STP Ethernet cable
Surge protection 10KV
Transmission speed 100 Mbps
CiA402 device profile CSP, PP, Home
Incremental encoder input ±EA x2, ±EB x2
Encoder index signal input ±EZ x2
MI/O input signal PEL x2, MEL x2, ORG x2, and EMG x2
User I/O signal 4DI, 2DO
Position control Incremental / Absolute mode
Data range: 32 bits
Homing mode ORG, EZ, Limit & totally 31 types

 

Drive

Input voltage 24VDC
Drive model 2-phase, bi-polar current driving system
Resolution 500 ~ 50,000 pulse / revolution configured by software
Current setting 1.8A / axis.
LED indicator PWR, RUN, ERR, PEL, MEL, ORG, EMG
Power consumption 3.1W typical (130mA / 24VDC) no load
Ambient temperature In use: 0~50℃
In storage: -20~70℃
Humidity In use: 35~85% (Noncondensing)
In storage: 10~90% (Noncondensing)
Vib. resist 0.5G

In the chemical, medical, manufacturing and power industries, Alicat instruments rapidly and precisely monitor and control critical process parameters. The speed and reliability of Alicat devices are particularly well suited to vacuum coating processes, such as Atomic Layer Deposition and Chemical Vapor Deposition. All of the mass flow or pressure controller’s data, including: mass flow, volumetric flow, pressure, temperature, selected gas calibration, setpoint, and totalized flow can be output to a central PLC running a compatible automation protocol. Users may also change setpoint or gas selection, and issue other commands remotely.

Learn about our PC-based motion controller to use with this node

Sign up to our newsletter

Subscribe to receive news about product update and innovation.

COMPANY

About Us

Careers

Contact Us

Terms

RESOURCES

Support

Knowledge Base

Community

PRODUCTS

Motion Controller

Automation Services

Collaborative Robot

Robot Retrofit

© 2021 Robotic Systems, Inc.

Terms of Service